-
Group 7 – Week 4
Computer This week we are going to test the manual control system of the tank. The purpose of this test, is to understand the behavior of the tank and to make sure that the manual control system works along with the components. Since, this is a tank and not a car, we also need […]
-
Haptix – Week 38
Virtual meeting through Microsoft Teams on Thursday at 10:40. The meeting lasted over an hour. Out from the meeting it was decided that the electro students should continue working on developing the glove, begin to finalize which components to use and design the necessary circuits. The computer students decided to continue working independently with their […]
-
Project Fetch (12.09-19.09) Week 4
Hardware This week was mostly spent waiting for the raspberry pi to finish various tasks such as installing dependencies and building software. We were not able to do much progress on the programming because when the pi is working we cannot do anything else on it. And the building process usually takes hours. The long […]
-
Shallow Blue Week 37
During this week the computer students continued working on the detection of the pieces and doing research on how to use OpenCV. The electrical students have been working on designing the system and started looking at the motor system the chessboard needs. Helge Sondre Ulberg: This week i worked on the pointcloud for the detection […]
-
Group 4: ASD – Sprint 3
Date: 05.09.2019 – 12.09.2019 This week contained a lot of technical research and work that needed to be done in order to progress with the drone development. Last week we discussed which single-board computer we would depend on for the machine learning and after a lot of comparisons, we finally decided to use an Nvidia […]
-
Group 6 week 37
Blog week 3 Group members: Steffen Barskrind (Computer) Kristian Meinich Backer-Owe (Computer) Nils Herman Lien Håre (Computer) Joel Soto Escoda (Electro) Marius Kul Balsvik (Machine) Kristoffer Andersen (Machine) What happened this week This week we got to work on the gun itself that we’re going to use on our tank. We started of dismantling to […]
-
Group 7 – Week 3
Mechanical Our main focus for this week was to conduct research on the caterpillar track and the components that follow: The three main components in the track are: The gears that transfer power from the motors to the belt The belt The suspension Belt We found only pre-dimensioned belts online and this means we have […]
-
Haptix – Week 37
Virtual meeting at 10:00 AM on Thursday through Microsoft Teams. The group decided to split up into a computer and electro party for this week. The computer students will focus on the setup of a Unity environment for the VR, while also learning how we can take advantage of the software. The Unity application will be companied with HTC Vive, Leap Motion tracking and the Haptic gloves. Something which will be connected in a later session. But for now, the computer students will have to make a foundation for how we […]
-
Group Project Report week 37
This week we have worked with the 3D modelling of the system. We used Solid Works for this. This is the first model, but we realized that there will be some changes so we started working on a new and more improved design. The pump motor for prototyping is finished, but it seems that the […]
-
Group Project Report week 36
Since our group consists of only computer students, we will meet some mechanical and electrical challenges. But for now, we manage it. We have 3d printed one pump. This pump will be used for testing only since the printer we used was a home printer and not accurate enough. Each pump will have an associated […]