-
Week 50 part 1
Summary: We went through some drastic changes, made big progress and are very close to completion #1 Cannon Design Changes, Daniel#2 Projectile calculations, David For many weeks now I have worked on the cannon with a flawed way of approach. The original concept was to make a cannon that could launch different types of projectiles. […]
-
Holobot week 50 (part2)
Mads All other exams are finally done and I can resume the Holobot with my full attention. The mechanical and physical are nearly done. The geared DC motors have arrived and are now mounted, they work as intended. This will be a longer blog post which looks back at what I have done the last […]
-
Week 16 (07.12 – 13.12): Automatic watering system for plants
Final Prototype: System Showcase: This is the final presentation video of our system with all its functionality. We did a recording before adding the cover, and after we mounted the cover the system wouldn’t work properly, unfortunately. Therefore, the final video presentation of the system will be without the cover attached. We feel that the […]
-
Eleventh & twelfth sprint – Puck Buddies
Due to extreme rush to finish another exam last week I forgot to post to the blog. As such there is content for the two last weeks in this blog post. Gaute Week 48 Have been pretty busy with other exams this week so I haven’t done much on the model, but I have 3D […]
-
Holobot week 50 (part1)
JENS (recap) It’s been a few weeks since I posted anything, so be warned. This is going to be a long one. A new skill! I never soldered anything before, and my first job was to solder wires on two miniscule copper pads on an Arduino Nano BLE. Great, I thought. How hard can it […]
-
Mekaniske aspektet av akvariet. (Inge)
Første steg: Min første illustrasjon av systemet. Det jeg ønsker å kunne gjøre er å vaske alle sidene av et akvariet innvendig. Utover dette ønsker jeg at det skal kunne gjøres med én vaske modul, så den må kunne flyttes mellom sidene. Det ville naturligvis vært enklere å lage en statisk modul til hver side, […]
-
Week 49: Smart Aquarium
Bluetooth functionality for the Smart Aquarium is done between an Android app and the Arduino Nano 33 BLE, meaning we need some Arduino code for sending information as well as a good amount of Android code to connect and receive this information.The arduino code is almost complete (shown below), though the sensors inputs will need […]
-
05.12.20-06.12.20
Alison: Komme ordentlig i gang med Android Studio. Laget et forside og begynt med de fleste undersidene Begynt å koble sidene sammen Interface er så godt som på plass Begynt på en datamodell, må gjøres ferdig
-
Week 15 (30.11-06.12): Automatic watering system for plants
Software (Marius): Last night (Monday 30.11) I received the new design on the case for our system from Shadi. Since my 3D-printer is 150x150x150 mm, the case parts had to be divided into eight different parts to be able to print them. I started printing the first part of the case this morning (01.12). All […]
-
Week 13-14 (16.11 – 29.11): Automatic watering system for plants
Mechanical (Shadi and Per-Terje): Week 13 : We assembled all the parts together and we discussed the ability to find a solution to print the surrounding case for the system, and we decided to divide the case into 8 parts to fit Marius printer workspace. week 14 : We started designing the new surrounding case […]