-
Week 50 part 2
As it is the final day, we think that one final Post is in order The Fenrir Howlizter Cannon is now almost at the stage of completion. We are waiting for some of the pieces to be 3d printed, but our core concept is done, and only need minuscule adjustments to be fully operational. The […]
-
Uke 50 (Inge)
Siden sist har jeg laget en ny skinne for å flytte system mellom 3 av akvariets sider. Vi tar kun 3 sider fordi den siste siden vil være inn mot veggen og det gjør ting enklere. Dette er en 3D printet løsning, så det er en fordel med lego erfaring. Delene har hull og tapper […]
-
Thirteenth and final sprint – Puck Buddies
Gaute This is the final design that we landed on. There has been a lot of work put down in the process to get where we are now. A tremendous amount of hours in solidworks and many iterations on each part pays of when it comes to the end product. I have based the design […]
-
Holobot week 50 (part3)
Mads This is going to be a summary of the semester, the challenges, victories and quite a lot of failures. The idea of the Holobot was formed the second week into the semester. Group members had a big wish to use the HoloLens, but it needed to be incorporated into something mechanical. Thus the idea […]
-
10.12.20
Igjennom en rekke forsøk for å få kode og oppkobling til å fungere har vi i løpet av de siste dagene, men nå har vi et presentabelt resultat. Alt som mangler for oppkobling nå er å gjemme det pent under aquariet. 07/08/09/10: Så har Kasper jobbet med å ferdigstille Arduino skript, mens Fredrik og Gustav […]
-
Week 50 part 1
Summary: We went through some drastic changes, made big progress and are very close to completion #1 Cannon Design Changes, Daniel#2 Projectile calculations, David For many weeks now I have worked on the cannon with a flawed way of approach. The original concept was to make a cannon that could launch different types of projectiles. […]
-
Holobot week 50 (part2)
Mads All other exams are finally done and I can resume the Holobot with my full attention. The mechanical and physical are nearly done. The geared DC motors have arrived and are now mounted, they work as intended. This will be a longer blog post which looks back at what I have done the last […]
-
Week 16 (07.12 – 13.12): Automatic watering system for plants
Final Prototype: System Showcase: This is the final presentation video of our system with all its functionality. We did a recording before adding the cover, and after we mounted the cover the system wouldn’t work properly, unfortunately. Therefore, the final video presentation of the system will be without the cover attached. We feel that the […]
-
Eleventh & twelfth sprint – Puck Buddies
Due to extreme rush to finish another exam last week I forgot to post to the blog. As such there is content for the two last weeks in this blog post. Gaute Week 48 Have been pretty busy with other exams this week so I haven’t done much on the model, but I have 3D […]
-
Holobot week 50 (part1)
JENS (recap) It’s been a few weeks since I posted anything, so be warned. This is going to be a long one. A new skill! I never soldered anything before, and my first job was to solder wires on two miniscule copper pads on an Arduino Nano BLE. Great, I thought. How hard can it […]