Today Alvin and arman continued doing some lasercutting. Here is the process of using the lasercutter. The machine we used is an Epilog Laser Fusion M2, with FlexiDESIGNER Software. Before doing any cutting, we start off in a CAD model, in this case Solidworks. Then we saved the file as an .dxf file and exported this to the FlexiDESIGNER program.

Then we did the right adjustments, grouping so the model can be moved and place it in the lower left corner using “DesignCentral”.

After this you hit print with the configurations like on the pictures above.

And finally you get this.

See you soon,

Group 6